Thank you for choosing PowerOn Electric Bikes!
Enclosed
you will find the manual for the Road Warrior Fat eBike.
Below
you will find a video link with a demonstration on how to assemble
your ebike. You can easily assemble the bike yourself, or you can
take it to a local shop and have it assembled for you.
Thanks!
PowerOn
Electric Bikes
___________________________________________________________
Instruction Manual
Road
Warrior Fat eBike
Battery:
The
battery should already be charged when the ebike arrives. However,
you may want to charge it up for a short time until the light turn
green on the battery charger.
The
battery has a 55 mile range when using 50% power. When using full
power you can expect to get approx 32 miles.
*LCD
Display & Control Panel:
To
turn the bike on, press and hold the MODE button.
Turning The Headlight On/Off -
Press
and hold the + button until the light comes on. Push and hold again
to turn the light off.
Making Other Changes:
1.
To Clear The Miles On Your Display
Press & hold both the + & - button at the same time
You
will get a screen that looks like this:
Use the + button to select Y and then press the Mode button.
2. Increasing Display Brightness:
The next screen will be to increase/decrease the back light on the display.
The screen will look like this:
Use
the + & - buttons to choose the brightness level that you want
then press the Mode button.
3. Changing Km/h to Mph:
The
next screen will be for changing kilometer per hour to miles per hour
on the display.
Select use the + button to select 1 for MPH or 2 for Km/h then press the Mode button.
*When
you are done with your selections press and hold the Mode button
until it goes back to the main screen.
Pedal
Assist Controls:
The
pedal assist is controlled by the + and – buttons.
The
pedal assistance has the following increments.
Level
1 = 25%
Level
2 = 34%
Level
3 = 43%
Level
4 = 52%
Level
5 = 61%
Level
6 = 70%
Level
7 = 79%
Level
8 = 88%
Level
9 = 96%
To
increase the assistance, simply press the + button quickly (remember,
if you LONG hold this button it will control the headlight.)
To
decrease the assistance, simply press the – button.
Half Twist Throttle: (See picture below)
The
throttle has an on/off button to keep the throttle from
accidentally becoming engaged.
The
PAS (pedal assist) needs to be on level 1 or higher for the throttle
to engage.
Walking
Assist Mode:
If
you are pushing your bike and would like assistance you can press
and hold the – button.
To
stop the assistance simply press and hold the – button again.
USB
Charger:
A
USB charger for cell phones is located on the upper right hand side
of the battery.
PowerOn Electric Bikes,
LLC, 2017
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.